There is no need to worry when you are suffering the difficult time in the MCSE 70-411 exam preparation, CertBus will assist you to pass the MCSE 70-411 exam with latest update MCSE 70-411 Administering Windows Server 2012 PDF and VCE dumps. CertBus has the most comprehensive Microsoft exam preparation materials, covering each and every aspect of MCSE 70-411 Administering Windows Server 2012 exam curriculum. We ensure you 100% success in MCSE 70-411 exam.
We CertBus has our own expert team. They selected and published the latest 70-411 preparation materials from Microsoft Official Exam-Center: http://www.certgod.com/70-411.html
QUESTION NO:: 51
Your network contains an Active Directory domain named contoso. com.
You need to install and configure the Web Application Proxy role service.
What should you do?
A. Install the Active Directory Federation Services server role and the Remote Access
server role on different servers.
B. Install the Active Directory Federation Services server role and the Remote Access
server role on the same server.
C. Install the Web Server (IIS) server role and the Application Server server role on the
same server.
D. Install the Web Server (IIS) server role and the Application Server server role on
different servers.
Answer: A
Explanation: Web Application Proxy is a new Remote Access role service in Windows
Server. 2012 R2.
C:\Users\albo\Desktop\1.jpg
QUESTION NO:: 99
Your network contains an Active Directory domain named contoso. com. The domain
contains a domain controller named DC1.
You run ntdsutil as shown in the exhibit. (Click the Exhibit button. )
You need to ensure that you can access the contents of the mounted snapshot.
What should you do?
A. From the snapshot context of ntdsutil, run activate instance “NTDS”.
B. From a command prompt, run dsamain. exe -dbpath c:
\$snap_201204131056_volumec$\windows\ntds\ntds. dit -Idapport 389.
C. From the snapshot context of ntdsutil, run mount {79f94f82-5926-4f44-8af0
2f56d827a57d}.
D. From a command prompt, run dsamain. exe -dbpath c:
\$snap_201204131056_volumec$\windows\ntds\ntds. dit -Idapport 33389.
Answer: D
Explanation:
By default, only members of the Domain Admins group and the Enterprise Admins group
are allowed to view the snapshots because they contain sensitive AD DS data. If you want
to access snapshot data from an old domain or forest that has been deleted, you can allow
nonadministrators to access the data when you run Dsamain. exe.
If you plan to view the snapshot data on a domain controller, specify ports that are different
from the ports that the domain controller will use.
A client starts an LDAP session by connecting to an LDAP server, called a Directory
System Agent (DSA), by default on TCP port and UDP [7] port 389. The client then sends
an operation request to the server, and the server sends responses in return. With some
exceptions, the client does not need to wait for a response before sending the next request,
and the server may send the responses in any order. All information is transmitted using
Basic Encoding Rules (BER).
http: //technet. microsoft. com/en-us/library/cc753609(v=ws. 10). aspx
QUESTION NO:: 43 DRAG DROP
Your network contains an Active Directory forest named contoso. com. All domain
controllers run Windows Server 2008 R2.
The schema is upgraded to Windows Server 2012 R2.
Contoso. com contains two servers. The servers are configured as shown in the following
table.
Server1 and Server2 host a load-balanced application pool named AppPool1.
You need to ensure that AppPool1 uses a group Managed Service Account as its identity.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area
and arrange them in the correct order.
Answer:
QUESTION NO:: 103 HOTSPOT
Your network contains an Active Directory domain named contoso. com.
You need to create a certificate template for the BitLocker Drive Encryption (BitLocker)
Network Unlock feature.
Which Cryptography setting of the certificate template should you modify?
To answer, select the appropriate setting in the answer area.
Answer:
QUESTION NO:: 86
You have Windows Server 2012 R2 installation media that contains a file named Install.
wim.
You need to identify which images are present in Install. wim.
What should you do?
A. Run imagex. exe and specify the /ref parameter.
B. Run dism. exe and specify the /get-mountedwiminfo parameter.
C. Run dism. exe and specify the /get-imageinfo parameter.
D. Run imagex. exe and specify the /verify parameter.
Answer: C
Explanation:
Option:
/Get-ImageInfo
Arguments:
/ImageFile:
[{/Index: | /Name: }]
Displays information about the images that are contained in the . wim, vhd or . vhdx file.
When used with the / Index or /Name argument, information about the specified image is
displayed, which includes if an image is a WIMBoot image, if the image is Windows 8. 1
Update, see Take Inventory of an Image or Component Using DISM. The /Name argument
does not apply to VHD files. You must specify /Index: 1 for VHD files.
http: //technet. microsoft. com/en-us/library/cc749447(v=ws. 10). aspx
http: //technet. microsoft. com/en-us/library/dd744382(v=ws. 10). aspx
http: //technet. microsoft. com/en-us/library/hh825224. aspx
QUESTION NO:: 32
Your network contains an Active Directory domain named contoso. com. The domain
contains a file server named Server1 that runs Windows Server 2012 R2. Server1 has a
share named Share1.
When users without permission to Share1 attempt to access the share, they receive the
Access Denied message as shown in the exhibit. (Click the Exhibit button. )
You deploy a new file server named Server2 that runs Windows Server 2012 R2.
You need to configure Server2 to display the same custom Access Denied message as
Server1.
What should you install on Server2?
A. The Remote Assistance feature
B. The Storage Services server role
C. The File Server Resource Manager role service
D. The Enhanced Storage feature
Answer: C
Explanation:
Access-Denied Assistance is a new role service of the File Server role in Windows Server
2012.
We need to install the prerequisites for Access-Denied Assistance.
Because Access-Denied Assistance relies up on e-mail notifications, we also need to
configure each relevant file server with a Simple Mail Transfer Protocol (SMTP) server
address. Let
QUESTION NO:: 26
Your network contains an Active Directory domain named contoso. com. All servers run
Windows Server 2012 R2. The functional level of both the domain and the forest is
Windows Server 2008 R2.
The domain contains a domain-based Distributed File System (DFS) namespace that is
configured as shown in the exhibit. (Click the Exhibit button. )
You need to enable access-based enumeration on the DFS namespace.
What should you do first?
A. Raise the domain functional level.
B. Raise the forest functional level.
C. Install the File Server Resource Manager role service on Server3 and Server5.
D. Delete and recreate the namespace.
Answer: D
Explanation: Access-based enumeration is only supported on a Domain-based
Namespace in Windows Server 2008 Mode. This type of Namespace requires a minimum
Windows Server 2003 forest functional level and a minimum Windows Server 2008 domain
functional level.
The exhibit indicates that the current namespace is a Domain-based Namespace in
Windows Server 2000 Mode. To migrate a domain-based namespace from Windows 2000
Server mode to Windows Server 2008 mode, you must export the namespace to a file,
delete the namespace, recreate it in Windows Server 2008 mode, and then import the
namespace settings.
Ref: http://msdn.microsoft.com/en-us/library/cc770287.aspx
http://msdn.microsoft.com/en-us/library/cc753875.aspx
QUESTION NO:: 46
Your network contains an Active Directory domain named contoso. com. The domain
contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced
GPOs.
You have two GPOs linked to an organizational unit (OU) named OU1.
You need to change the precedence order of the GPOs.
What should you use?
A. Dcgpofix
B. Get-GPOReport
C. Gpfixup
D. Gpresult
E. Gpedit. msc
F. Import-GPO
G. Restore-GPO
H. Set-GPInheritance
I. Set-GPLink
J. Set-GPPermission
K. Gpupdate
L. Add-ADGroupMember
Answer: I
Explanation:
The Set-GPLinkcmdlet sets the properties of a GPO link.
You can set the following properties:
1 Enabled. If the GPO link is enabled, the settings of the GPO are applied when
Group Policy is processed for the site, domain or OU.
1 Enforced. If the GPO link is enforced, it cannot be blocked at a lower-level (in the
Group Policy processing hierarchy) container.
1 Order. The order specifies the precedence that the settings of the GPO take over
conflicting settings in other GPOs that are linked (and enabled) to the same site,
domain, or OU.
http: //technet. microsoft. com/en-us/library/ee461022. aspx
QUESTION NO:: 21
You have a server named Server1 that runs Windows Server 2012 R2. You create a Data
Collector Set (DCS) named DCS1.
You need to configure DCS1 to log data to D: \logs.
What should you do?
A. Right-click DCS1 and click Properties.
B. Right-click DCS1 and click Export list. . .
C. Right-click DCS1 and click Data Manager. . .
D. Right-click DCS1 and click Save template. . .
Answer: A
Explanation:
The Root Directory will contain data collected by the Data Collector Set. Change this
setting if you want to store your Data Collector Set data in a different location than the
default. Browse to and select the directory, or type the directory name.
To view or modify the properties of a Data Collector Set after it has been created, you can:
* Select the Open properties for this data collector set check box at the end of the Data
Collector Set Creation Wizard.
* Right-click the name of a Data Collector Set, either in the MMC scope tree or in the
console window, and click Properties in the context menu.
Directory tab:
In addition to defining a root directory for storing Data Collector Set data, you can specify a
single Subdirectory or create a Subdirectory name format by clicking the arrow to the right
of the text entry field.
QUESTION NO:: 35 DRAG DROP
You are a network administrator of an Active Directory domain named contoso. com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Web Server (IIS) server role installed.
Server1 will host a web site at URL https: //secure. contoso. com. The application pool
identity account of the web site will be set to a domain user account named AppPool1.
You need to identify the setspn. exe command that you must run to configure the
appropriate Service Principal Name (SPN) for the web site.
What should you run?
To answer, drag the appropriate objects to the correct location. Each object may be used
once, more than once, or not at all. You may need to drag the split bar between panes or
scroll to view content.
Answer:
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 70-411 exam successfully with our Microsoft materials. CertBus Administering Windows Server 2012 exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Administering Windows Server 2012 exam questions and answers are the most valid. CertBus exam Administering Windows Server 2012 exam dumps will help you to be the Microsoft specialist, clear your 70-411 exam and get the final success.
70-411 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mNzhvYUxTRFllckU/view?usp=sharing
70-411 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/70-411.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.