This is a note. Please give me your attention if you are preparing for your Microsoft 70-410 exam. It is really a tough task to pass MCSA 70-410 exam. However, CertBus will help you on that with the most comprehensive PDF and VCEs of the latest MCSA 70-410 exam questions, covering each and every aspect of MCSA 70-410 Installing and Configuring Windows Server 2012 exam curriculum.

We CertBus has our own expert team. They selected and published the latest 70-410 preparation materials from Microsoft Official Exam-Center: http://www.certgod.com/70-410.html

QUESTION NO:24

In an isolated test environment, you deploy a server named Server1 that runs a Server Core Installation of

Windows Server 2012 R2. The test environment does not have Active Directory Domain Services (AD DS)

installed.

You install the Active Directory Domain Services server role on Server1.

You need to configure Server1 as a domain controller.

Which cmdlet should you run?

A. Install-ADDSDomain

B. Install-ADDSDomainController

C. Install-WindowsFeature

D. Install-ADDSForest

Correct Answer: D

Explanation

Explanation/Reference:

QUESTION NO:51

You have a server named Server1.Server1 runs Windows Server 2012 R2.

Server1 has a thin provisioned disk named Disk1.

You need to expand Disk1.

Which two actions should you perform? (Each correct answer presents part of the solution.

Choose two.)

A. From File and Storage Services, extend Disk1.

B. From File and Storage Services, add a physical disk to the storage pool.

C. From Disk Management, extend the volume.

D. From Disk Management, delete the volume, create a new volume, and then format the volume.

E. From File and Storage Services, detach Disk1.

Correct Answer: AB

Explanation

Explanation/Reference:

Step 1 (B): if required add physical disk capacity. Step 2 (A): Dynamically extend the virtual disk (not

volume). The File and Storage Services role and the Storage Services role service are installed by default,

but without any additional role services. This basic functionality enables you to use Server Manager or

Windows PowerShell to manage the storage functionality of your servers.

QUESTION NO:5

You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role

installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following

table.

You have a virtual machine named VM1.

You need to configure VM1 to connect to SAN1.

What should you do first?

A. Create a Virtual Fibre Channel SAN.

B. Create a Hyper-V virtual switch.

C. Add one HBA.

D. Configure network adapter teaming.

Correct Answer: A

Explanation

Explanation/Reference:

A virtual fibre channel SAN will group physical HBA ports together so that you can add a virtual fibre

channel adapter to a virtual machine that can be connected to a virtual SAN.

References:

http://technet.microsoft.com/en-us/library/hh831413.aspx

QUESTION NO:15

Your network contains an Active Directory domain named contoso.com. All client computer accounts are in

an organizational unit (OU) named AllComputers. Client computers run either windows 7 or Windows 8.

You create a Group Policy object (GPO) named GP1.

You link GP1 to the AllComputers OU.

You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.

What should you configure?

A. The Security settings of GP1

B. The Block Inheritance option for AllComputers

C. The Security settings of AllComputers

D. The WMI filter for GP1

Correct Answer: D

Explanation

Explanation/Reference:

Explanation:

Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of

Group Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a

WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter

evaluates to false, the GPO is not applied (except if the client computer is running Windows Server, in

which case the filter is ignored and the GPO is always applied).If the WMI filter evaluates to true, the GPO

is applied.

References:

Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group

Policy, p.470, 482

http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC

QUESTION NO:11

You work as an administrator at ABC.com. The ABC.com network consists of a single domain

named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows

Server 2012 installed.

ABC.com has a domain controller, named ABC-DC01, which contains the ABC.com domain

QUESTION NO:45

Your network contains an Active Directory domain named contoso.com. The domain contains a server

named Server1 that runs Windows Server 2012 R2. You create a new inbound rule by using Windows

Firewall with Advanced Security.

You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received

through a network address translation (NAT) device on the network.

Which setting in the rule should you configure?

A. Interface types

B. Authorized computers

C. Remote IP address

D. Edge traversal

Correct Answer: D

Explanation

Explanation/Reference:

Explanation:

Edge traversal allows the computer to accept unsolicited inbound packets that have passed through an

edge device, such as a network address translation (NAT) router or firewall.

References:

http://technet.microsoft.com/en-us/library/cc731927.aspx

QUESTION NO:40

You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel

adapter.

Host1 contains two virtual machines named VM1 and VM2.

You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.

Which two configurations should you perform? (Each correct answer presents part of the solution. Choose

two.)

A. On VM1, configure a Fibre Channel adapter.

B. On Host1, configure a new virtual switch.

C. On VM1, add a network adapter.

D. On Host1, configure a new Virtual Fibre Channel SAN.

E. On Host1, modify the Hyper-V settings.

Correct Answer: AD

Explanation

Explanation/Reference:

Explanation:

The process of setting up virtual Fibre Channel starts with building a virtual SAN. DOthis by opening the

Hyper-V Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the

Virtual SAN Manager command from the shortcut menu. Then (A) Once you have created a virtual SAN,

the next step in the process is to link a virtual machine to the virtual SAN.To do so, right click on the virtual

machine for which you want to provide Fibre Channel connectivity and select the Settings command from

the resulting shortcut menu. Next, select the Add Hardware container, as shown in the figure above, and

then select the Fibre Channel Adapter option from the list of available hardware. Etc.

* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest

operating systemswith direct access to a Fibre Channel SAN by using a standard World Wide Name

(WWN) associated with a virtual machine

QUESTION NO:20

You work as an administrator at ABC.com. The ABC.com network consists of an Active Directory

forest that contains a root domain, named ABC.com, and two child domains, named us.ABC.com

and uk.ABC.com. All servers on the ABC.com network have Windows Server 2012 installed.

The root domain hosts a domain local distribution group, named ABCGroup. You are preparing to

issue ABCGroup read-only access to a shared folder hosted by the us.ABC.com domain.

You want to make sure that ABCGroup is able to access the shared folder in the us.ABC.com

domain.

Which of the following actions should you take?

A. You should consider re-configuring ABCGroup as a universal Admins group.

B. You should consider re-configuring ABCGroup as a universal security group.

C. You should consider re-configuring ABCGroup as a global administrators group.

D. You should consider re-configuring ABCGroup as a local administrators group.

Answer: B

Explanation:

QUESTION NO:34

You work as an administrator at ABC.com. The ABC.com network consists of a single domain

named ABC.com. All servers on the ABC.com network have Windows Server 2012 installed.

ABC.com has a server, named ABC-SR07, which has the AD DS, DHCP, and DNS server roles

installed. ABC.com also has a server, named ABC-SR08, which has the DHCP, and Remote

Access server roles installed. You have configured a server, which has the File and Storage

Services server role installed, to automatically acquire an IP address. The server is named ABC-

SR09.

You then create a filter on ABC-SR07.

Which of the following is a reason for this configuration?

A. To make sure that ABC-SR07 issues ABC-SR09 an IP address.

B. To make sure that ABC-SR07 does not issue ABC-SR09 an IP address.

C. To make sure that ABC-SR09 acquires a constant IP address from ABC-SR08 only.

D. To make sure that ABC-SR09 is configured with a static IP address.

Answer: B

Explanation:

QUESTION NO:7

You have a print server named Server1 that runs Windows Server 2012 R2.

You discover that when there are many pending print jobs, the system drive occasionally runs out of free

space.

You add a new hard disk to Server1.You create a new NTFS volume.

You need to prevent the print jobs from consuming disk space on the system volume.

What should you modify?

A. The properties on the new volume

B. The properties of the Print Spooler service

C. The Print Server Properties

D. The properties of each shared printer

Correct Answer: C

Explanation

Explanation/Reference:

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 70-410 exam successfully with our Microsoft materials. CertBus Installing and Configuring Windows Server 2012 exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Installing and Configuring Windows Server 2012 exam questions and answers are the most valid. CertBus exam Installing and Configuring Windows Server 2012 exam dumps will help you to be the Microsoft specialist, clear your 70-410 exam and get the final success.

70-410 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mMEl2b3FXZFZEbms/view?usp=sharing

70-410 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/70-410.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection