Which certification is the most popular and worthy to get? No doubt the JN0-694 Enterprise Routing and Switching Support, Professional (JNCSP-ENT) exam is a worth challenging task but you should take among all the IT certifications . CertBus is providing the latest version of JN0-694 PDF and VCE dumps now. Comprehensive understanding on JN0-694 Enterprise Routing and Switching Support, Professional (JNCSP-ENT) exam syllabus through CertBus 100% pass guarantee of the success on your JN0-694 Enterprise Routing and Switching Support, Professional (JNCSP-ENT) exam taking.

We CertBus has our own expert team. They selected and published the latest JN0-694 preparation materials from Juniper Official Exam-Center: http://www.certgod.com/JN0-694.html

QUESTION NO: 9

An end user on interface ge-0/0/1.0 is trying to receive a multicast stream for 232.0.0.1 sourced from but is

not receiving it. You use the show igmp group command and do not see this group in the list. You enable

traceoptions for IGMP and find the following IGMPv3 report from the end user\’s host:

Jun 10 13:11:03.577641 RCV IGMP V3 Report len 16 from 192.168.1.13 intf ge-0/0/1.0 Jun 10

13:11:03.577984 Records 1

Jun 10 13:11:03.578027 Group 232.0.0.1, type IS_EX, aux_len 0, sources 0

Which configuration change is required to allow the group to be added in the router?

A. set routing-options multicast ssm-groups 232.0.0.1/32

B. set routing-options multicast asm-override-ssm

C. set protocols igmp interface ge-0/0/1.0 promiscuous-mode

D. set protocols igmp interface ge-0/0/1.0 group-limit 2

Correct Answer: B

QUESTION NO: 3

Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass through the

device unaffected.

Which CoS component is causing this problem?

A. BA classification

B. RED

C. MF classification

D. Rewrite rules

Correct Answer: D

QUESTION NO: 2

You are troubleshooting a problem where an OSPF adjacency between two neighboring routers will not

form.

What are two reasons for this problem? (Choose two.)

A. One or both of the connected interfaces are missing the family inet statement.

B. One or both of the connected interfaces are missing the family iso statement.

C. The connected interfaces are not on the same subnet.

D. Another IGP is running on one or both of the routers, overriding OSPF.

Correct Answer: BD

QUESTION NO: 7

You observe that a router is using an unusually high amount of CPU cycles. You determine that continuous

SPF calculations in OSPF are being performed.

What are two reasons for this problem? (Choose two.)

A. The wrong authentication keys between the OSPF neighbors are used.

B. The interface MTU is mismatched between the OSPF neighbors.

C. There are duplicate router IDs within the OSPF area.

D. An OSPF adjacency is flapping.

Correct Answer: CD

QUESTION NO: 5

Your switch is experiencing a problem where a port that should have only one host connected occasionally

shows that multiple MAC addresses are being learned.

Which configuration setting would ensure that no extra hosts can join the network using this switch port?

A. mac-limit

B. no-mac-learning

C. persistent-learning

D. bpdu-block-on-edge

Correct Answer: D

QUESTION NO: 10

You recently deployed two Anycast RPs. Multicast clients in the network are reporting that they are

receiving traffic from some, but not all, multicast sources.

What are two solutions for this problem? (Choose two.)

A. Configure MSDP between the Anycast RPs.

B. Configure rp-set for the Anycast RPs.

C. Configure multicast BGP between the Anycast RPs.

D. Configure the network to always use the RPT and not switch over to the SPT.

Correct Answer: AB

QUESTION NO: 8

Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance these VLANs

between two different root bridges. You are currently using the default RSTP settings and notice that all

VLANs are using the same root bridge.

How do you ensure the VLANs are load-balanced between two root bridges?

A. Configure MSTP with two MSTI regions and split the VLAN range between them.

B. Configure VSTP with two VLAN groups and split the VLAN range between them.

C. Configure two RSTP instances and split the VLAN range between them.

D. Configure STP and RSTP and split the VLAN range between them.

Correct Answer: A

QUESTION NO: 6

You are having problems redistributing RIP routes into OSPF. Your Junos device has the following

configuration:

[edit protocols ospf]

user@router# show

import my-policy;

area 0.0.0.0 {

interface ge-0/0/0.0;

interface ge-0/0/ ;

interface ge-0/0/ {

passive;

}

}

What would resolve the problem?

A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.

B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.

C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.

D. Use the area-range parameter instead of a routing policy.

Correct Answer: D

QUESTION NO: 4

Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an IBGP

neighborship.

What are two reasons for the IBGP neighborship problem? (Choose two.)

A. One of the devices has a misconfigured BGP peer address.

B. One or both of the connected interfaces are missing the family iso statement.

C. OSPF has a lower route preference than BGP.

D. A firewall filter on one of the interfaces is blocking TCP traffic.

Correct Answer: BC

QUESTION NO: 1

You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support all C-

VLANs; however, only some VLANs are able to send traffic across the tunnel. Switch-1 has the following

configuration:

[edit vlans]

user@Switch-1# show

v100 {

vlan-id 100;

interface {

ge-0/0/0.10;

ge-0/0/1.20;

}

dot1q-tunneling {

customer-vlans [ ];

}

}

What would solve this problem?

A. Add family ethernet-switching to the tunnel-side interface on Switch-1.

B. Implement RSTP.

C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.

D. Remove the customer-vlans statement.

Correct Answer: C

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the JN0-694 exam successfully with our Juniper materials. CertBus Enterprise Routing and Switching Support, Professional (JNCSP-ENT) exam PDF and VCE are the latest and most accurate. We have the best Juniper in our team to make sure CertBus Enterprise Routing and Switching Support, Professional (JNCSP-ENT) exam questions and answers are the most valid. CertBus exam Enterprise Routing and Switching Support, Professional (JNCSP-ENT) exam dumps will help you to be the Juniper specialist, clear your JN0-694 exam and get the final success.

JN0-694 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mZWg0WDltSWpvY2s/view?usp=sharing

JN0-694 Juniper exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/JN0-694.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection