CertBus 2018 Real Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 1379QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2018 Real 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 1379QAs are all new published by Cisco Official Exam Center
No doubt the Cisco CCIE Latest 400-101 vce dumps exam is a very tough exam to pass. But as it is so popular in the IT industry, it is worthy to challenge yourself with this. Here you will find free CertBus Cisco sample exam test questions that will help you prepare in passing the CCIE Jul 25,2018 Hotest 400-101 practice exam. CertBus guarantees you 100% pass exam CCIE Hotest 400-101 study guide .
CertBus – 400-101 certification with money back assurance. pass the 400-101 exam on your first attempt with CertBus! CertBus 400-101 certification questions. CertBus – help candidates on all 400-101 certification exams preparation. pass 400-101 certification exams, get it certifications easily. CertBus free certification 400-101 exam | CertBus practice 400-101 exams | CertBus test 400-101 questions.
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html
Refer to the exhibit.
R1 has an EBGP session to ISP 1 and an EBGP session to ISP 2. R1 receives the same prefixes
through both links.
Which configuration should be applied so that the link between R1 and ISP 2 will be preferred for
outgoing traffic (R1 to ISP 2)?
A. Increase local preference on R1 for received routes
B. Decrease local preference on R1 for received routes
C. Increase MED on ISP 2 for received routes
D. Decrease MED on ISP 2 for received routes
Local preference is an indication to the AS about which path has preference to exit the AS in order
to reach a certain network. A path with higher local preference is preferred more. The default value
of preference is 100.
Why would a rogue host that is running a DHCP server on a campus LAN network present a
A. It may allocate IP addresses from an unknown subnet to the users.
B. All multicast traffic can be sniffed by using the DHCP multicast capabilities.
C. The CPU utilization of the first hop router can be overloaded by exploiting DHCP relay open
D. A potential man-in-the-middle attack can be used against the clients.
Which statement is true about TCN propagation?
A. The originator of the TCN immediately floods this information through the network.
B. The TCN propagation is a two step process.
C. A TCN is generated and sent to the root bridge.
D. The root bridge must flood this information throughout the network.
New Topology Change Mechanisms
When an 802.1D bridge detects a topology change, it uses a reliable mechanism to first notify the
This is shown in this diagram:
Once the root bridge is aware of a change in the topology of the network, it sets the TC flag on the
BPDUs it sends out, which are then relayed to all the bridges in the network. When a bridge
receives a BPDU with the TC flag bit set, it reduces its bridging-table aging time to forward delay
seconds. This ensures a relatively quick flush of stale information. Refer to Understanding
Spanning-Tree Protocol Topology Changes for more information on this process. This topology
change mechanism is deeply remodeled in RSTP. Both the detection of a topology change and its
propagation through the network evolve.
Topology Change Detection
In RSTP, only non-edge ports that move to the forwarding state cause a topology change. This
means that a loss of connectivity is not considered as a topology change any more, contrary to
802.1D (that is, a port that moves to blocking no longer generates a TC). When a RSTP bridge
detects a topology change, these occur:
It starts the TC While timer with a value equal to twice the hello-time for all its non-edge
designated ports and its root port, if necessary.
It flushes the MAC addresses associated with all these ports.
Note: As long as the TC While timer runs on a port, the BPDUs sent out of that port have the TC
BPDUs are also sent on the root port while the timer is active.
Topology Change Propagation
When a bridge receives a BPDU with the TC bit set from a neighbor, these occur:
It clears the MAC addresses learned on all its ports, except the one that receives the topology
It starts the TC While timer and sends BPDUs with TC set on all its designated ports and root port
(RSTP no longer uses the specific TCN BPDU, unless a legacy bridge needs to be notified).
This way, the TCN floods very quickly across the whole network. The TC propagation is now a one
step process. In fact, the initiator of the topology change floods this information throughout the
network, as opposed to 802.1D where only the root did. This mechanism is much faster than the
802.1D equivalent. There is no need to wait for the root bridge to be notified and then maintain the
topology change state for the whole network for seconds.
In just a few seconds, or a small multiple of hello-times, most of the entries in the CAM tables of
the entire network (VLAN) flush. This approach results in potentially more temporary flooding, but
on the other hand it clears potential stale information that prevents rapid connectivity restitution.
Which two are effects of connecting a network segment that is running 802.1D to a network
segment that is running 802.1w? (Choose two.)
A. The entire network switches to 802.1D and generates BPDUs to determine root bridge status. B.
A migration delay of three seconds occurs when the port that is connected to the 802.1D bridge
C. The entire network reconverges and a unique root bridge for the 802.1D segment, and a root
bridge for the 802.1w segment, is chosen.
D. The first hop 802.1w switch that is connected to the 802.1D runs entirely in 802.1D compatibility
mode and converts the BPDUs to either 802.1D or 802.1w BPDUs to the 802.1D or 802.1w
segments of the network.
E. Classic 802.1D timers, such as forward delay and max-age, will only be used as a backup, and
will not be necessary if point-to-point links and edge ports are properly identified and set by the
Each port maintains a variable that defines the protocol to run on the corresponding segment. A
migration delay timer of three seconds also starts when the port comes up. When this timer runs,
the current STP or RSTP mode associated to the port is locked. As soon as the migration delay
expires, the port adapts to the mode that corresponds to the next BPDU it receives. If the port
changes its mode of operation as a result of a BPDU received, the migration delay restarts.
802.1D works by the concept that the protocol had to wait for the network to converge before it
transitioned a port into the forwarding state. With Rapid Spanning Tree it does not have to rely on
any timers, the only variables that that it relies on is edge ports and link types.
Any uplink port that has an alternate port to the root can be directly placed into the forwarding
state (This is the Rapid convergence that you speak of “restored quickly when RSTP is already in
use?”). This is what happened when you disconnected the primary look; the port that was ALT,
moved to FWD immediately, but the switch also still needs to create a BDU with the TC bit set to
notify the rest of the network that a topology has occurred and all non-edge designated ports will
transition to BLK, LRN, and then FWD to ensure there are no loops in the rest of the network. This
is why if you have a host on a switchport, and you know for a fact that it is only one host, enable
portfast to configure the port as an edgeport so that it does not have to transition to all the STP
Which two options are contained in a VTP subset advertisement? (Choose two.)
A. followers field
B. MD5 digest
C. VLAN information
D. sequence number
When you add, delete, or change a VLAN in a Catalyst, the server Catalyst where the changes are
made increments the configuration revision and issues a summary advertisement. One or several
subset advertisements follow the summary advertisement. A subset advertisement contains a list
of VLAN information.
If there are several VLANs, more than one subset advertisement can be required in order to
advertise all the VLANs.
Subset Advertisement Packet Format
This formatted example shows that each VLAN information field contains information for a different
VLAN. It is ordered so that lowered-valued ISL VLAN IDs occur first:
Most of the fields in this packet are easy to understand. These are two clarifications:
Which three options are features of VTP version 3? (Choose three.)
A. VTPv3 supports 8K VLANs.
B. VTPv3 supports private VLAN mapping.
C. VTPv3 allows for domain discovery.
D. VTPv3 uses a primary server concept to avoid configuration revision issues.
E. VTPv3 is not compatible with VTPv1 or VTPv2.
F. VTPv3 has a hidden password option.
Key Benefits of VTP Version 3
Much work has gone into improving the usability of VTP version 3 in three major areas:
The new version of VTP offers better administrative control over which device is allowed to update
other devices\’ view of the VLAN topology. The chance of unintended and disruptive changes is
significantly reduced, and availability is increased. The reduced risk of unintended changes will
ease the change process and help speed deployment.
Functionality for the VLAN environment has been significantly expanded. Two enhancements are
most beneficial for today\’s networks:
Refer to the exhibit.
Which statement is correct about the prefix 18.104.22.168/8?
A. The prefix has encountered a routing loop.
B. The prefix is an aggregate with an as-set.
C. The prefix has been aggregated twice, once in AS 100 and once in AS 200.
D. None of these statements is true.
Refer to the exhibit.
A packet from RTD with destination RTG, is reaching RTB. What is the path this packet will take
from RTB to reach RTG?
A. RTB – RTA – RTG
B. RTB – RTD – RTC – RTA – RTG
C. RTB – RTF – RTE – RTA – RTG
D. RTB will not be able to reach RTG since the OSPF configuration is wrong.
Refer to the exhibit.
After a link flap in the network, which two EIGRP neighbors will not be queried for alternative
paths? (Choose two.)
Both 192.168.3.7 and 192.168.3.8 are in an EIGRP Stub area
The Enhanced Interior Gateway Routing Protocol (EIGRP) Stub Routing feature improves network
stability, reduces resource utilization, and simplifies stub router configuration.
Stub routing is commonly used in a hub and spoke network topology. In a hub and spoke network,
one or more end (stub) networks are connected to a remote router (the spoke) that is connected to
one or more distribution routers (the hub). The remote router is adjacent only to one or more
distribution routers. The only route for IP traffic to follow into the remote router is through a
distribution router. This type of configuration is commonly used in WAN topologies where the
distribution router is directly connected to a WAN. The distribution router can be connected to
many more remote routers. Often, the distribution router will be connected to 100 or more remote
routers. In a hub and spoke topology, the remote router must forward all nonlocal traffic to a
distribution router, so it becomes unnecessary for the remote router to hold a complete routing
table. Generally, the distribution router need not send anything more than a default route to the
When using the EIGRP Stub Routing feature, you need to configure the distribution and remote
routers to use EIGRP, and to configure only the remote router as a stub. Only specified routes are
propagated from the remote (stub) router. The router responds to queries for summaries,
connected routes, redistributed static routes, external routes, and internal routes with the message
“inaccessible.” A router that is configured as a stub will send a special peer information packet to
all neighboring routers to report its status as a stub router. Any neighbor that receives a packet
informing it of the stub status will not query the stub router for any routes, and a router that has a
stub peer will not query that peer. The stub router will depend on the distribution router to send the
proper updates to all peers.
Refer to the exhibit.
Why is AS 65333 in parentheses?
A. It is an external AS.
B. It is a confederation AS.
C. It is the AS of a route reflector.
D. It is our own AS.
E. A route map has been applied to this route.
F. The BGP next hop is unreachable.
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.